汉江上游干支流沉积物细菌群落多样性和影响因素

为了解汉江上游干支流沉积物细菌多样性以及确定性过程和随机性过程在沉积物细菌群落构建过程中的相对重要性,基于Illumina高通量测序技术,分析了环境因子对细菌群落组成的影响,采用非度量多维尺度(NMDS)排序探究了季节之间沉积物细菌群落的差异,并结合中性群落模型和标准化随机率量化了确定性过程和随机过程对群落构建的影响。结果表明:汉江上游及其支流细菌群落主要由变形菌门(Proteobacteria)、拟杆菌门(Bacteroidetes)、蓝藻门(Cyanophyta)、浮霉菌门(Planctomycetes)和酸杆菌门(Acidobacteria)等组成；细菌群落在不同季节有显著差异；地理距离和环境因子对细菌群落结构影响较小,确定性过程并未在细菌群落组成中起到主导作用；随机过程很大程度上影响了群落在秋季和春季的组成,是沉积物细菌群落构建的主导因素。     

Experimental study and numerical modeling of mixing by air injection in yield stress fluids using the OpenFOAM software

Mixing by gas injection is an operation used in industrial processes such as wastewater treatment, metallurgy, or methanization in which pressurized gas is injected into a fluid in order to reduce concentrations and temperatures gradients. This study demonstrates how the CFD toolbox OpenFOAM can be used to simulate such flows. Experimental measurements and observations have been performed on a pilot-scale reactor where pressurized air is injected in a yield stress fluid. The volume of fluid method and an adaptive mesh with refinement at the interface have been used to track the gas inclusions. The numerical model accuracy has been assessed by comparing experimental and numerical results related to the bubble's frequency, dimensions, and rising velocities as well as the fluid recirculation, yielded, and unyielded regions in the tank. The influence of injection parameters such as the injection flow rate and the fluid rheological parameters has been quantified.     

Evidence of fluid evolution of Baoshan Cu−Pb−Zn polymetallic deposit: Constraints from in-situ sulfur isotope and trace element compositions of pyrite

In-situ LA-ICP-MS and S isotopes of pyrite from the Baoshan Cu polymetallic deposit were conducted to investigate the ore-forming process and the enrichment mechanism of elements. Three generations of pyrite (Py I, Py II, and Py III) in the skarn-type ores and pyrite in the carbonate-hosted sulfide ores from central, western, and northern (C_Py, W_Py, and N_Py) mining districts are selected for comparison. Compared with Py I and Py III, the contents of most elements in Py II are apparently higher. The As and Se contents are high within a wide range and are decoupled in the growth band of the C_Py. The highest As, Se, and Pb contents were found in W_Py and N_Py. These results indicate the drastic changes in the temperature and fluid mixing during the mineralization. The occurrence of fluctuation and change in temperature and f(O₂) was triggered by intermittent pulses of magmatic-hydrothermal fluids, mixing with meteoric water, and water−rock interactions. The sulfur isotopes of all species of pyrite indicated the magmatic source. The change in the f(O₂) conditions caused slight differences in the sulfur isotope compositions. Consequently, a metallogenic model was proposed to explain the ore-forming processes.     

Improved photoluminescence and multi-mode optical thermometry of Er3+/Yb3+ co-doped (Ba,Sr)3Lu4O9 phosphors

Contactless optical thermometers have attracted extensive attentions for applications in scientific research and technological fields due to their apparent advantages. Herein, a novel sequence of Ba_3-xSr_xLu₄O₉ (B_3-xS_xLO):Er³⁺/Yb³⁺ phosphors were successfully prepared to investigate the temperature sensing property. By establishing energy transfer from Yb³⁺ to Er³⁺ and regulating the local lattice environment, up-conversion luminescence of Er³⁺ is dramatically improved when excited by 980 nm laser. This can effectively promote signal-noise ratio and reduce the errors in temperature detection. Furthermore, a multi-mode optical thermometry, which includes the fluorescence intensity ratio (FIR) from two thermally coupled levels of ²H_11/2/⁴S_3/2, FIR based on non-thermally coupled system of ²H_11/2/⁴F_9/2 and fluorescence lifetime of ⁴S_3/2 state of Er³⁺, was explored systematically. The fabricated samples exhibit the superior temperature measurement performances containing wide temperature-sensing range, superior signal discriminability, high sensitivity and favorable repeatability, indicative of the enormous utilization prospects of B_3-xS_xLO:Er³⁺/Yb³⁺ for thermometry.     

Bearing capacity of horizontally layered geosynthetic reinforced stone columns

In very soft soils, the bearing capacity of stone columns may not improve significantly due to very low confinement of the surrounding soil. Therefore, they may be reinforced with geosynthetics by using vertical encasement or horizontal layers. Very limited studies exist on horizontally reinforced stone columns (HRSCs). In this research, some large body laboratory tests have been performed on horizontally reinforced stone columns with diameters of 60, 80, and 100?mm and groups of stone columns with 60?mm diameter. Results show that the bearing capacity of stone columns increases by using horizontally reinforcing layers. Also, they reduce lateral bulging of stone columns by their frictional and interlocking effects with stone column aggregates. Finally, numerical analyses were carried out to study main affecting parameters on the bearing capacity of HRSCs. Numerical analysis results show that the bearing capacity increases considerably with increasing the number of horizontal layers and decreasing space between layers.     

Effects of fibers and conventional reinforcement contents on fibers scaterring in prismatic bars

This paper presents results from a second stage of an experimental study of the dependence of steel fibers distribution along RFC prismatic specimens on the conventional reinforcement ratio and on the total amount of fibers in the concrete mix. The experimental program included two types of prismatic specimens with 30- and 60- kg/m³ of hooked-end steel fibers. Each specimen was sawed into equal segments and the numbers of fibers appearing at the cross-sections were counted and used for a further statistical analysis. This analysis comprised calculations of the average value and standard deviation of a non-dimensional variable, which represents the distribution of the total steel along the specimen. They were used to calibrate a theoretical model, which had been previously proposed by the authors. The test results showed reasonable to good agreement with the theoretical model. A comparison between the results of the 30- and 60-kg/m³ fibers shows that as the conventional reinforcement ratio increases, the standard deviations for the different mixtures approach each other.     

振动监测系统的可调增益技术与实现

文章设计了一种具有可调增益功能的振动监测系统。首先从监测层和测量层两个方面提出了振动监测系统的整体框架,之后给出了硬件系统和软件系统的设计方法及软件实现代码,利用控制芯片和可调增益放大器,在监测系统中整合了一套可根据采集信号幅值大小调整增益的数据采集装置;利用模拟信号发生器对不加增益和设置可调增益之后的两种信号进行了对比分析,并在汽轮发电机组实际工况下进行了振动信号采集。结果表明,具备可调增益功能的振动监测系统可有效提高采集信号的信噪比,提高汽轮发电机组的振动监测能力。     

Nature inspired 21 branches sneezewort/Achillea ptarmica plant growth pattern–shaped antenna for Ku‐band applications

This reported paper presents the design and analysis of wideband nature inspired planar antenna of 46 × 18 × 1.6 mm³ size, designed using FR4 (Flame Retardant) substrate. The antenna patch is delineated from the growth pattern of sneezewort plant with supplementary notion of golden ratio in branching and branch width. The total number of branches in each stage follows the Fibonacci series and the branch width is calculated from the golden ratio concept. Starting from one feed line and two branches, the maximum numbers of branches are increased to 20. There has been significant enhancement in the radiation performance of proposed geometry by increasing the number of branches to 21 and by modifying ground with T‐shaped slot. The antenna covers wide impedance bandwidth of 8.2 to 16.5 GHz by possessing stable radiation characteristics.     

A hidden Markov model to detect regime changes in cryptoasset markets

The objective of this work is to understand the dynamics of cryptocurrency prices. Specifically, how prices switch between different regimes, going from “bull” to “stable” and “bear” times. For this purpose, we propose a hidden Markov model that aims at explaining the evolution of Bitcoin prices through different, unobserved states. The implementation of the proposed model includes a likelihood ratio test that allows to compare models with different states and with different covariance structures. Our empirical findings show that the time movements of Bitcoin prices across different exchange markets are well-described by the proposed model. In particular, a parsimonious model with a diagonal covariance matrix leads to better predictions, compared with a model with a full covariance matrix.     

How does a bank's involvement interplay with a firm's capacity investment? An analysis and comparison of different consortium structures

As nonrecourse project finance (rather than financing on a sovereign basis) is becoming more prevalent worldwide, financing institutions have to collaborate more closely with firms to optimize capacity‐investment and financing decisions. Under this background, this paper presents a stylized Stackelberg games model, taking into account the firm's capacity investment as well as the bank's interest rate and funding ratio decisions. Consortium structures between bank and firm are formalized into five modes based on industry practice, namely, the integrated consortium, pure shareholder funding, bank as leader, full coordination, and bank as follower. The optimality and equilibrium of each of the five modes are analytically derived, and their existence and uniqueness are demonstrated. Valuable economic insights are obtained through both modeling analysis and numerical experiments, with the main findings including the following: (i) a lack of bank financing leads to insufficient capacity investment and poor consortium performance; (ii) interest rate and funding ratio play important but different roles in the bank's risk management; (iii) the bank's proactivity in leading and coordinating the consortium is critical for the two parties’ overall performance; and (iv) if the bank is the follower, the firm's capacity decision is irrelevant to the bank's loan contract, and the consortium cannot be coordinated to the first‐best level of performance.